What should be paid attention to when using a pellet machine to make pellets in winter?

As the weather gradually turns cold, the nature of the raw materials, the climate environment and the operation of personnel will have a significant impact on the granulation effect. Granulation is also the most affected factor in all processing links, especially in the low temperature period in winter, the problem is more prominent.

In order not to affect the use of the pellet machine, what production matters should be paid attention to during the pellet production?

Moisture of raw materials

Due to the dry and cold characteristics of winter raw materials, it may be difficult to fully absorb the heat and moisture of steam within the limited conditioning time, resulting in poor conditioning effect and difficulty in granulation.

When using raw materials, we should pay attention to the humidity of the raw materials. For wet raw materials, they should be dried first to avoid affecting the normal use of the pellet machine. In addition, waterproof work should be done to prevent the produced pellets from getting damp.

Pay attention to the cleaning of the pellet machine

When using the pellet machine, pay attention to keeping the equipment clean and clean the snow, ice and debris on the surface of the equipment in time. During use, you should also pay attention to the cleaning of all parts of the machine to better prevent blockage and maintain the equipment.

Prevent icing

The temperature is low in winter. When using the pellet machine, you need to strengthen the protection of the equipment to prevent problems such as icing.

For pellet machines that are not used for a long time, they should be stored in a dry and ventilated place to avoid freezing of the equipment. In addition, when using the pellet machine in winter, it is necessary to check the cooling system of the equipment regularly to ensure that the equipment will not overheat during operation.

Check the equipment regularly

In order to ensure the normal operation of the pellet machine, it is necessary to check each part regularly to ensure that all parts are in normal working condition. It is very necessary to regularly replace the filter and oil of the machine to ensure the long-term stable operation of the equipment.

Use of lubricating oil

When injecting lubricating oil, please pay attention to the fact that the lubricating grease of the pellet machine may solidify due to low temperature, making it difficult to add lubricating grease. Liquidized oil injection can be achieved through mechanical assisted oil injection, manual heating, oil dilution and other methods.

Pay attention to the ambient temperature

When using the pellet machine, the principle of steam supply first and then feed production should be implemented to ensure the temperature of the pellet machine modulator. The production workshop should realize heating supply as much as possible to ensure that the pellet machine and production personnel work at normal temperature.

When the weather is too cold, everyone must pay attention to the above matters. Paying attention to the maintenance of the feed pellet machine and biomass pellet machine can effectively extend the service life of the equipment.