This is a 4-ton per hour biomass straw pellet production line in Sudan project, and it is also the 7th time that we have exported straw processing equipment to Sudan. In addition to straw pellet equipment, we have also exported sorghum straw crushing system, straw drying system, etc. to Sudan.
With the increase of environmental awareness, the straw pellet production line project has attracted more and more attention. The project is to process crop waste such as straw into livestock feed and efficient and environmentally friendly fuel.
This product is not only widely used in the local market in Sudan, but also exported to Europe and the United States, with broad market prospects. According to market analysis, the annual growth rate of this industry will exceed 30% in the next few years, and the overall market size is huge.
The customer of this biomass straw pellet production line in Sudan project is an agricultural company in Sudan, which invested in the construction of a 10,000-ton biomass pellet project in October 2023. The total investment of this project is US$70,000, with 3 employees. Considering the electricity cost, production is basically concentrated at night.
Name:
straw pelleting plant
Country:
Sudan
Date:
October 2023
Capacity:
4T/H
Pellet Size:
6-8mm
The install period:
38 Days
Control Mode:
Semi-automatic
Guiding Price:
70,000 USD
The prospects for processing straw pellets in Sudan are very broad. Sudan has rich agricultural resources, including a large amount of arable land and abundant water resources, which provides good conditions for the production of straw.
In addition, Sudan's climatic conditions are suitable for crop growth and high crop yields, which further increases the supply of straw. These factors make the processing of straw pellets in Sudan have great potential.
The Sudanese government attaches great importance to agricultural development and has introduced a series of policies to encourage agricultural investment and expand exports. This provides policy support and guarantee for straw pellet processing projects.
With the improvement of environmental awareness, the demand for biomass energy is also increasing. As a clean and environmentally friendly energy source, the market demand for straw pellets will further expand.
Although the specific application details of straw pellet processing technology in Sudan are not mentioned in detail, the field straw pelletization technology has been promoted and applied in some areas, which shows that there is a certain foundation in technology.
With the continuous advancement of technology and the increase in market demand, the application field of straw pellets will become more and more extensive, and the market demand will continue to grow.
The specific data on investment cost and economic benefits are not clearly mentioned in the search results, but considering Sudan's agricultural resources and government policy support, investing in straw pellet processing projects is expected to get a good return.
In addition, the versatility of straw pellets (such as fuel, feed and organic fertilizer) also increases its economic value.
The scale of this biomass straw pellet production line in Sudan project is to produce 10,000 tons of biomass pellets per year, build production workshops and ancillary facilities, etc. The project site area is 2,000 square meters and the total construction area is 1,200 square meters. The main structures of the plant are shown in the table below.
| Serial number | Name | Building area (m2) | Building structure |
| 1 | Production workshop | 600 | Steel structure |
| 2 | Office | 150 | Brick-concrete structure |
| 3 | Warehouse | 450 | Brick-concrete structure |
The biomass straw pellet production line in Sudan project includes main works, auxiliary works, environmental protection works and public works. The project composition is shown in the table below.
| Engineering Type | Engineering Name | Construction Content |
| Main engineering | Production Workshop | Building Area 600m2 |
| Auxiliary engineering | Office | Building Area 150m2 |
| Warehouse | Building Area 450m2 | |
| Utility Room | / | |
| Public engineering | Steam supply | The steam for the pelletizing machine of this project is supplied by a steam boiler |
| Power supply | The electricity for this project is supplied by the local power supply station, and the plant is equipped with an 80KVA transformer | |
| Water supply | The water for the project is supplied by the tap water in the plant | |
| Wastewater | A septic tank | |
| Environmental protection engineering | Waste gas | Bag dust collector + 15m exhaust pipe |
| Noise | Foundation shock absorption, etc. | |
| Solid waste | Domestic garbage will be transported by the sanitation department, unqualified products will be sold out for disposal, collected dust will be reused in production, equipment lubricating oil and waste oil will be properly collected and temporarily stored |
The raw materials and products of this biomass straw pellet production line in Sudan project are detailed in the table below:
| Serial number | Name | Annual consumption |
| Raw and auxiliary materials | ||
| 1 | Chopped straw, dry sawdust, peanut shells | 10010 tons |
| 2 | Packaging bags | 10000 pcs |
| Product plan | ||
| 1 | Biomass pellets | 10000 tons |
The main process flow of this biomass straw pellet production line in Sudan project is as follows:
The main production equipment of this biomass straw pellet production line in Sudan project is shown in the table below:
| Serial number | Name | QTY |
| 1 | Screw conveyor | 1 unit |
| 2 | Straw pellet machine | 1 unit |
| 3 | Belt conveyor | 3 units |
| 4 | Cooling chamber | 1 unit |
| 5 | Forklift | 2 unit |
| 6 | Bag dust collector | 1 unit |
In the overall layout of the biomass straw pellet plant in Sudan project, the special requirements of biomass pellet processing enterprises are fully considered, and the production workshops, auxiliary workshops and life auxiliary facilities of the entire plant are reasonably arranged.
In the general layout design, according to the requirements of topography, meteorological conditions and process flow, the production plant of this project is concentrated on the east side of the plant, the workshop power supply and cooling, the pipelines are short and concentrated, and energy can be greatly saved.
The layout of the production workshops and auxiliary workshops of the entire plant is clearly divided, and the production process is reasonable.
The production water of this biomass straw pellet production line in Sudan project is mainly used for humidification of raw materials to achieve the moisture content required by the process, and volatilizes in the form of steam in the pelletizing process.
In this project, the amount of water required to produce 1 ton of product is 0.05m3. The main sources of domestic water are tap water and purchased purified water. During the commissioning period, the actual domestic water consumption is 0.25m3/d, and the actual production water consumption is 1.5m3/d.
The main noise-generating equipment in this project includes pellet machines, conveyors and other equipment. The general noise source strength is below 95dB (A).
Low-noise equipment is selected and all equipment is installed indoors; high-noise equipment is built inside the factory to strengthen the airtightness of the factory; isolation belts are set between the noise sources in the factory and the factory boundary, and trees, flowers and plants are planted in the isolation belts to green the factory area.
The solid waste generated by the project is domestic garbage and dust collected by bag dust collectors. The collected dust is reused in production, and the domestic garbage of employees is collected and entrusted to the sanitation department for unified disposal.
The straw biomass pellet production line in Sudan is a promising investment. For investors, it is recommended to pay attention to the following aspects:
There are many brands of straw pellet machines on the market, but the technical content is not the same. If you want to invest in a biomass straw pellet production line in Sudan, you need to choose a brand of equipment with good quality and advanced technology.
Before investing, you need to fully understand the market demand for straw pellets, grasp market trends, and understand product categories, quality requirements, specifications and other information.
Production capacity planning is an important part of investment in straw pellet light industry projects. It is necessary to formulate a reasonable production capacity plan based on market demand, investment tolerance, technology, human resources and other factors to ensure the smooth implementation of the project.
In general, the straw pellet line project has a high market prospect and investment value. Investors can choose the investment direction that suits them according to their own situation.
If you are interested in our biomass straw pellet production line in Sudan project, or also want to invest in straw pellet processing business, feel free to contact RICHI MACHINERY to get a full set of straw biomass pellet plant solutions, equipment quotations and other information!
Having the right mix of reliable, high-quality pellet machine and pelletizing systems and expert support is essential to your success. Watch how our end-to-end feed pellet plant solutions have helped our customers optimize their performance.
Our customized and future-proofed turnkey pellet plant solutions is designed with you at the core. From vision to reality and beyond, our team stays connected with yours. Giving you peace-of-mind with an expert at your side.
At RICHI, we go beyond project completion. With RICHI Servicee, we’re your dedicated partners in success. Count on us for expert guidance, minimal downtime, and optimized productivity. Choose RICHI for unmatched service and support.
Meet global product demands and quality standards with industry-leading pellet plant design, engineering, equipment, and construction services for pellet processors.
Your Partner Beyond Project Completion
2000+ cases
RICHI is the leading designer, manufacturer and builder of pellet plants in the world, completing over 2000 projects in 140 countries across 6 continents.
Read More
Increase plant productivity, profitability, and safety by integrating high quality equipment into your pellet production line. Over the years, RICHI has become China's top pellet equipment manufacturer. At the same time, RICHI has established valuable partnerships with the world's leading component and raw material manufacturers to bring you the best there is in technology, automation, and efficiency in pelleting plant machinery.
For nearly 30 years, RICHI has been providing best-in-class pellet plant equipment and services to clients across a variety of industries, sizes, and needs. We pride ourselves on the knowledge and skill that each team member possesses – from our technical sales team to our process design engineers. You can count on RICHI Machinery to take your operation to the next level of innovation, quality, and success.
Need help with your pellet manufacturing plant project? Contact us today.
ANIMAL FEED
BIOMASS
WOOD
ORGANIC FERTILIZER
AQUA FEED
CAT LITTER
MUNICIPAL WASTE RECYCLING
SPECIAL PELLET PRODUCTION
RICHI Machinery continues to deliver world class pellet mill equipment, pellet plant engineering and project solutions that add value to our customers in the animal feed, wood waste, agriculture waste, organic fertilizer, cat litter and special pellet products industries. Throughout the years, we RICHI Machinery have built strong brand, becoming industry-leading pellet machine manufacturer. We value integrity, promise quality, and prioritize your success.
Learn MoreWith our expert team, we precisely implement your process engineering requirements in pellet mill and pelletizing plant systems. No matter which industry you’re in – we understand your needs and deliver solutions that meet the highest standards.
At RICHI, quality comes first. Our pellet making machine and related pellet line equipment undergo rigorous quality controls to ensure they meet the highest standards. Rely on products that are durable, safe, and efficient.
With decades of experience in pellet machine and pellet production line production, we have earned a reputation as a trusted partner in various industries. Our expertise allows us to cover a wide range of applications.
Not only do we offer premium pelleting equipment, but we are also experts at designing, building, installing, and maintaining facilities from the ground up. Our expertise is within pellt plant process design, discovering the most efficient, productive, and profitable way to handle your materials in an end-to-end cycle.
Keeping in touch with us is an effective way to solve all your problems. If you have any needs or questions, please leave your contact information, then RICHI technical consultants will send design, quotation, videos to your mailbox. You can also contact us directly via WhatsApp: +86 13838389622
Copyright©2015-2024 by HENAN RICHI MACHINERY CO., LTD. All rights reserved.