4-5T/H Biomass Wood Pellet Production Line in Denmark

engineering content and composition

The main construction content and composition of the biomass wood pellet production line in Denmark project are shown in the following table:

The biomass wood pellet production line in Denmark project arranges the production area according to the functional zoning according to production needs. The functional zoning of the plant layout is clear, and the entrance and exit of the plant are set on the east side to facilitate the loading and unloading of transport vehicles; the loading and unloading site of the project is located on the east side of the plant.

The layout of the project plant is basically reasonably arranged according to the production process flow, and the process links are interrelated, which is also convenient for production management. Overall, the plant layout of this project has clear functional zoning, the production process flow is reasonably arranged, and the plant layout is basically reasonable.

Main products and production capacity

Project raw and auxiliary materials consumption table

wood pellet line Process design

According to the customer's raw material and process requirements, the process we designed for this biomass wood pellet production line in Denmark project is as follows:

1. Raw materials: Most of the purchased raw materials for this project come from furniture factory scraps, collected dust, etc.
2. Slicing: The wood waste such as logs, wood blocks, and wood strips in the project raw materials must be crushed by a slicer first, and then crushed together with other materials. The crushing process is carried out in a closed workshop.
3. Crushing: The crushed materials are further crushed together with other materials through a hammer mill machine to meet the material standards required by the granulation process.
4. Granulation: The crushed particles are granulated and formed using a wood pellet mill. The granulation process is a physical process, without adding any adhesives and without chemical reactions.
5. Screening: The products from the granulation process are screened by the screening equipment supporting the biomass pellet machine. The unqualified products screened are packaged by an automatic packaging machine, and the unqualified products are reused as raw materials in production.
6. Packaging: The qualified particles screened are bagged and packaged.

The granulation process of this biomass wood pellet production line in Denmark project does not require water addition, and the granulated products do not need to be dried.

They are directly screened, packaged and put into storage. This project uses the screening equipment of the wood pellet mill to screen out defective products. The unqualified products can be reused as raw materials, reprocessed and recycled.

List of main wood pellet making equipment

The main equipment of this biomass wood pellet production line in Denmark project includes slicer, hammer mill, wood pellet machine, cooler, screener, packing scale, conveyor, etc.

‌What are the prospects for building a wood pellet production line in Denmark?

In terms of market size, Europe, especially Germany, Italy, Sweden and other countries, are the main producers of wood pellets and occupy a large share of the global market. As part of Europe, Denmark's market size is also expanding, especially in heating and industrial uses, and the demand for wood pellets has increased significantly‌.

In terms of demand, wood pellets, as a clean and efficient energy source, have become a trend in Denmark and other European countries as the main energy source for residential buildings and heating facilities. With the increasing awareness of environmental protection and changes in heating methods, more and more areas are beginning to use wood pellets as the main fuel source‌.

In terms of production technology and raw materials, the production of wood pellets mainly relies on wood processing pellet machines, which can compress waste wood, branches and other raw materials into pellets.

Denmark has abundant sources of raw materials, including waste wood from forestry logging and transportation, waste wood from greening projects, etc., which provide sufficient raw materials for the production of wood pellets.

‌How to build a wood pellet production line in Denmark?

The basic steps for building a wood pellet production line in Denmark include: preparing relevant procedures, selecting appropriate equipment, building the production line, and subsequent operation and maintenance.

• First, relevant procedures need to be completed. You need to apply for a business license, environmental protection related procedures, tax registration certificate, fire safety license, etc. Completing these procedures will help ensure that the processing plant operates legally and enjoys policy support and market opportunities.
• Next, choose the right equipment. According to production needs, you can choose wood pellet production lines with different capacities of 1 ton, 2 tons, 3 tons, 5 tons, 6 tons, 15 tons or 20 tons per hour.
  These production lines usually include wood crushers and wood crushers, wood pellet dryer, wood pellet machine, wood pellet packaging machine and other equipment can realize full-process automated production from crushing, crushing, drying to granulation‌.
• Then, build the production line. Production line construction requires finding a suitable site and carrying out reasonable layout and installation. Ensure smooth connections between equipment and reasonable processes to improve production efficiency and reduce costs.
  At the same time, it is necessary to ensure that the environmental protection and safety measures of the production line are in place and comply with local environmental protection and safety standards‌.
• Finally, operations and maintenance are performed. After the production line is built, it needs to be debugged and tested to ensure the normal operation of the equipment. Regular maintenance of equipment is required in daily operations to ensure the stable and efficient operation of the production line.
  At the same time, attention needs to be paid to the supply and management of raw materials to ensure the continuous operation of the wood pellet production line.

What equipment is needed to open a biomass pellet plant in Denmark?

What equipment is needed to open a wood pellet production line in Denmark? This is a topic worth discussing. Below, RICHI will talk about it from several aspects.

• First of all, the equipment needed to build a biomass pellet plant in Denmark is a pellet machine. A pellet machine is a device that compresses biomass materials into pellets. There are many types of pellet machines, including flat die pellet machines, ring die pellet machines, roller pellet machines, etc. When selecting a pellet machine, factors such as production scale, processing raw materials, and processes need to be considered.
• Secondly, wood pellet plants also need pre-equipment such as crushers and dryers. The crusher can break the biomass raw materials into a size suitable for processing by the pellet machine, and the dryer can remove the moisture from the raw materials and improve the efficiency of the biomass pellet machine.
• In addition, auxiliary equipment such as motors, reducers, wood splitters, peeling machines, slicers, belt conveyors, scraper conveyors, bucket elevators, trommel screens, packaging scales, coolers, and vibrating screens are also required. In addition, burners, boilers, air compressors and other equipment are also required.

Biomass pellets are a clean fuel that can replace traditional coal, natural gas, etc. However, when using biomass pellets, burners, boilers and other equipment are required for combustion to generate heat energy. Quality inspection equipment is also needed.

As a new type of energy, the quality of biomass pellets needs to be improved. Therefore, during the production process, quality inspection is required to ensure that the produced particles meet standards and user needs.

To sum up, the equipment needed to build a wood pellet production line in Denmark includes pellet machines, crushers, dryers, motors, reducers, burners, boilers, and quality inspection equipment.

When selecting equipment, factors such as production scale, processing raw materials, and processes need to be considered. At the same time, it is also necessary to pay attention to the quality and performance of the equipment to ensure that the quality of the particles produced meets standards and user requirements.