How to Build a Complete Biomass Pellet Factory?

With the vigorous development of green economy in many countries around the world, low-carbon and environmental protection have become the inevitable requirements of industrial development. Many companies are looking for alternatives to coal energy. The cost of electricity and natural gas is higher. Biomass pellets are one of the preferred alternatives to coal.

Biomass pellet fuel does not need to be redesigned during use. It can be directly burned in coal boilers or only needs to replace the boiler. It is also cheaper than coal in terms of cost. The most important thing is that biomass pellets burn without pollution, and do not need to spend a lot of cost control like coal in tail-end processing.

Because of these factors and the support of policies in different countries, biomass pellets have developed rapidly in recent years, and pellet factories have also increased. At present, the market for biomass pellets is vast, and high-quality pellets are in short supply.

Many people have the idea of building a biomass pellet factory, but biomass pellet factories are not like other industries. Just buy equipment and build a factory building, but need to consider a variety of factors. So how to build a pellet factory? What conditions are required to build a pellet factory?

First of all, raw materials.

The most important premise for building a biomass pellet plant is raw materials! Only when there are sufficient raw materials around the plant and the price is relatively stable and low, can the premise of building a pellet plant be established.

If the raw materials of biomass pellets are unstable, they need to be purchased everywhere and the cost is high, then the profit will be greatly reduced or even loss. In the past, a large part of the reason for blindly following the trend to build a factory and finally closing down was that the raw materials were not properly controlled.

The second is local policies.

Whether there is policy support for the construction of a biomass pellet factory in the local area can largely determine the scale of the plant and the subsequent development. If the local government has a strong ban on coal, then biomass pellets will have a large market.

If the policy allows you to apply for electricity subsidies, it would be the best, because the cost of making biomass pellets is mostly raw materials and electricity. If there is a discount on electricity, the profit will be higher.

If the above two most important conditions are met, there will be no big problem in building a pellet plant. So how to build a pellet plant? In fact, how to build a pellet plant is actually how to choose a biomass pelletizing manufacturer. There are many manufacturers of biomass pelletizing equipment on the market. How should we choose?

Nowadays, pellet equipment manufacturers all have a set of process design processes. Complete sets of pellet equipment can actually be said to be non-standard customized products. The production line plan is designed and planned according to actual needs, such as raw material type, production capacity, etc.

The situation of each pellet factory is different, and there are certain differences in the biomass pellet production line plan. If the pellet equipment manufacturer does not give a plan and directly discusses the equipment, then the final production line is likely to be unsuitable for you or you have purchased equipment that you don’t need.

• If you are building a large biomass pellet factory, you need to carefully examine the equipment manufacturer to see whether their equipment can be stable and efficient, and whether they have complete pre-sales and after-sales services.
  Not only do you need to understand the scale and brand reputation of the equipment manufacturer, but you also need to visit the customer factories of the equipment manufacturer, especially to see whether their customer factories four or five years ago can operate normally.
• Secondly, give priority to service providers who can provide a complete set of equipment pellet production lines. While they can provide production line design services, integrated control can be optimized, reducing operating costs, and after-sales can also reduce a lot of trouble.

Of course, there are many factors to consider when purchasing equipment. The above is just the general direction. The details of the equipment and the price also need to be considered in many ways. RICHI Machinery hopes that more customers can choose the most suitable pelleting line for themselves to avoid blindly following the trend and closing the factory.

If you want to build a complete biomass pellet factory, you may wish to contact us. We will provide a full-process service from preliminary planning to equipment installation and commissioning, and personnel training. More importantly, we are a manufacturer of biomass pellet processing equipment, equipment accessories, and turnkey biomass pellet mill plant engineering service providers.

If you want to know how to layout the entire biomass fuel pellet factory, design production processes, configure equipment, and carry out equipment layout, etc., feel free to contact us for details. The RICHI technical team will provide you with a full range of technical support and services.

The following are some of the biomass pellet factory projects we have done:

Canada 2-3T/H Biomass Wood Pellet Plant

USA 10 Tons/Hour Wood Pellet Plant

2-2.5 T/H Biomass Pellet Plant In South Africa

8 T/H Straw Pellet Production Line In India

5T/H Wood Pellet Factory In Austria

2T/H Biomass Wood Straw Pellet Plant in Bulgaria

Germany 8 Tons/hour Biomass Wood Pellet Plant

600-700KG/H Biomass Pelletizing Plant in Kyrgyzstan

4-5T/H Biomass Wood Pellet Production Line in Denmark